HIKVISION DS-96000NI-I16/H Series User Manual Download

Page: 150 / 188

Network Video Recorder User Manual

149



The camera connection will be disabled when the device works in the hot spare mode.



It is highly recommended to restore the defaults of the device after switching the working
mode of the hot spare device to normal mode to ensure the normal operation afterwards.

Set Working Device

Go to System > Hot Spare.

Set the Work Mode as Normal Mode.

Check Enable.

Enter the IP address, user name, and password of hot spare device.

Hot Spare

Click Apply.

Manage Hot Spare System

Go to System > Hot Spare in hot spare device.

Check working devices from the device list and click Add to link the working device to the hot
spare device.

A hot spare device can connect up to 32 working devices.

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands