HIKVISION DS-96000NI-I16/H Series User Manual Download Page 31

Page: 31 / 188

Network Video Recorder User Manual

Enter the password to activate the IP camera (s) connected to the device.

Optionally, check Export GUID to export the GUID for future password

Click OK to save the password and activate the device.

After the device is activated, you should properly keep the password.

When you have enabled Export GUID, continue to export the GUID file to the USB flash driver
for the future password resetting.

You can duplicate the password to the IP cameras that are connected with default protocol.



Configure Unlock Pattern for Login.

Right click the mouse on the screen and select the menu to enter the interface.

Draw the Unlock Pattern

Draw the pre-defined pattern to unlock to enter the menu operation.

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands