HIKVISION DS-8100-ST Series User Manual Download Page 78

Page: 78 / 121

E-mail Settings

To configure E-mail settings:

Enter the Network Settings menu by clicking Menu > Setting > Network.

Select the

Advanced

tab.

Click the Set button next to

E-mail

to enter the E-mail menu. The E-mail menu is shown in Figure 12.

Figure 12. E-mail Menu

Enter e-mail settings. Please refer to Figure 12 for details.

Click the Test button to test e-mail settings.

Select

Advanced

tab to enable

Attached Image File

if you want to send email with alarm images, the

interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL here.

Click the OK button to save and exit the E-mail menu.

Note:

It is recommended that the e-mail settings be tested after they are entered. This can be accomplished by

clicking the Test button in the E-mail menu.

Summary of Contents for DS-8100-ST Series


























































































































Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands

HIKVISION DS-8100-ST Series, User Manual

Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands