HIKVISION DS-8100-ST Series, User Manual

Page: 100 / 121

99
5. Trading Information Settings, shown as Figure 3: Set the main type, with Card No., Trade Action,
Trade Amount and Serial No. selectable. Set the location, length, overlay position of the selected
main type. If required, input the characters beside
Display Prefix to add a prefix to the selected main
type. After completion of Trading Info settings, click the Trigger Channel item to enter the menu.
Figure 3. Trading Info Menu
Note:
When the main type is set to Trade Action, user may select the corresponding sub-type, with the InCard,
OutCard, Overlay, Query, Withdraw, Deposit, Change Password and Transfer options selectable.
6. Set the Location of the main type: Click the Set button beside Location to enter the menu, shown as Figure
4. Select the location of the card No. in the message to Fixed Offset or Token Offset . In token offset mode,
user may set the identifier (ASCII/HEX) and extra offset to determine the position of the content in the
message, as well as set the multiplier of the identifier.
Figure 4. Location Menu
7. Set the Length of the main type: Click the Set button beside Length to enter the menu shown as Figure 5.
Set the length of the card No. to Fixed Length , Variable Length or Auto Length . In variable length mode,
user may set the End Character to determine the length of the card No. In auto length mode, user may set the
length value and position to obtain the card No. length from the message.