HIKVISION DS-8100-ST Series User Manual Download Page 112

Page: 112 / 121

111

Figure 7. Network Permission Settings Menu

• Remote Log Search:

Remotely view logs that are saved on the DVR.

• Remote Configuration:

Remotely configure parameters, restore parameters to factory defaults and

import settings to as well as export settings from DVR.

• Remote Serial Port Control:

Configure settings for RS232 and RS485 ports.

• Remote Video Output Control:

Configure settings for video output.

• Two-way Audio:

Ability to use two-way radio between the remote client and the DVR.

• Remote Alarm Control:

Remote alert or control the relay output of the DVR. Alarm and exception

settings must be configured properly to upload to host.

• Remote Advanced Operation:

Remotely manage hard disk drives (initializing and setting

properties for HDDs). Ability to remote update system firmware and stop of the relay output

• Remote Shutdown/Reboot:

Remotely shutdown or reboot the DVR.

Click on the

Channel Permission

tab to configure channel permission, as shown in Figure 8. The

channel settings include:

Figure 8. Camera Permission Settings Menu

• Remote Live View:

Select and view live video over the network.

• Local Manual Record:

Locally start and stop manual recording on any of the channels.

• Remote Record Starting:

Remotely start and stop manual recording on any of the channels.

• Local Playback:

Locally play recorded files that are on the DVR.

• Remote Playback:

Remotely play and download recorded files that are on the DVR.

• Local PTZ Control:

Locally control PTZ cameras.

• Remote PTZ Control:

Remotely control PTZ cameras.

• Local Video Export:

Locally back up recorded files from any of the channels.

Summary of Contents for DS-8100-ST Series


























































































































Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands

HIKVISION DS-8100-ST Series, User Manual

Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands