HIKVISION DS-8100-ST Series, User Manual

Page: 104 / 121

103
11. Set the Overlay Position of the main type. This menu is used for setting the overlay position of the card No.,
with the X/Y coordinate configurable. If not required, select None to disable this feature.
12. Trigger Channel settings: Select the channel for message overlay and record triggering, and time delay for
recording if required. After completion of settings, click
OK to return to the ATM Settings menu.
Note:
If no InCard and OutCard commands are provided by the Trade Action type, please enable the time delay
function.
13. In the ATM Settings menu, click the Set button beside Serial Interception to enter the ATM232 settings
menu.
14. Configure ATM232 settings, shown as Figure 10, including baud rate, data bit, stop bit, parity, flow control,
etc.
Figure 10. ATM 232 Settings Menu