HIKVISION DS-8100-ST Series User Manual Download Page 109

Page: 109 / 121

108

Figure 2. More Settings Menu

Configure the following settings:

•

Device Name:

Name of the DVR used

•

Device No.:

Device number of DVR.

•

CVBS Output Brightness:

Video output brightness.

•

Transparency:

Menu transparency.

•

Operation Timeout:

Set timeout time for menu inactivity. For example, if timeout time was set to 5

minutes, after 5 minutes of inactivity in the General Settings menu, you’ll be returned to the Live
Preview.

•

Event Hint

: Enable/disable event hint function.

•

Output Hint:

Enable/disable video output hint for main or aux video output.

Note:

DS-8100AH (F) (L) I-ST does not provide the Output Hint function.

RS-232 Port Settings

To configure RS-232 devices to be used with the DVR:

Click Menu > Setting > RS232 to enter the RS-232 Settings menu, shown in Figure3.

Figure 3. RS-232 Settings Menu

Summary of Contents for DS-8100-ST Series


























































































































Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands

HIKVISION DS-8100-ST Series, User Manual

Search results

Summary of Contents for DS-8100-ST Series

Reviews:

Related manuals for DS-8100-ST Series

Brands by name

Popular brands