HIKVISION DS-7600NI-K2 User Manual Download Page 9

Page: 9 / 275

Network Video Recorder User Manual

Network Functions



Two self-adaptive 10M/100M/1000M network interfaces for DS-9600NI-I8, DS-9600NI-I16,

DS-8600NI-K8, DS-7700NI-I4 and DS-7700NI-K4, and the multi-address and network fault tolerance

working modes are configurable.



One self-adaptive 10M/100M/1000M network interface for DS-7600NI-K2/I2(/P), DS-7700NI-I4/P and

DS-7700NI-K4/P.



One self-adaptive 10M/100M network interface for DS-7600NI-K1 (/P).



Four independent PoE network interfaces are provided for /4P models, eight independent PoE network

interfaces for the /8P models, and sixteen independent PoE network interfaces for the /16P models.



IPv6 is supported.



TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.



TCP, UDP and RTP for unicast.



Auto/Manual port mapping by UPnP



Extranet access by HiDDNS.



Support access by HIK Cloud P2P.



Remote web browser access by HTTPS ensures high security.



The ANR (Automatic Network Replenishment) function is supported, it enables the IP camera save the

recording files in the local storage when the network is disconnected, and synchronizes the files to the

NVR when the network is resumed.



Remote reverse playback via RTSP.



Supports accessing by the platform via ONVIF.



Remote search, playback, download, locking and unlocking of the record files, and support downloading

files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart and shutdown.



RS-232, RS-485 transparent channel transmission.



Alarm and exception information can be sent to the remote host



Remotely start/stop recording.



Remotely start/stop alarm output.



Remote PTZ control.



Remote JPEG capture.



Virtual host function is provided to get access and manage the IP camera directly.



Two-way audio and voice broadcasting.



Embedded WEB server.

Development Scalability:



SDK for Windows system.



Source code of application software for demo.



Development support and training for application system.

Summary of Contents for DS-7600NI-K2




















































































































































































































































































Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands

HIKVISION DS-7600NI-K2, User Manual

Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands