HIKVISION DS-7600NI-K2 User Manual Download

Page: 110 / 275

Network Video Recorder User Manual

109

Click

Log Search

tab to enter Playback by System Logs.

Set search time and type and click

Search

button.

Figure 6. 17

System Log Search Interface

Choose a log with record file and click

button to enter Playback interface.

If there is no record file at the time point of the log, the message box “No result found” will pop up.

Figure 6. 18

Result of System Log Search

Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Summary of Contents for DS-7600NI-K2




















































































































































































































































































Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands

HIKVISION DS-7600NI-K2, User Manual

Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands