HIKVISION DS-7600NI-K2 User Manual Download

Page: 226 / 275

Network Video Recorder User Manual

225

15.4

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the configuration files of one

NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 15. 6

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the NVR.

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for DS-7600NI-K2




















































































































































































































































































Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands

HIKVISION DS-7600NI-K2, User Manual

Search results

Summary of Contents for DS-7600NI-K2

Reviews:

Related manuals for DS-7600NI-K2

Brands by name

Popular brands