56
Figure 59. Factory Default Menu
2.
Select the OK button to restore factory defaults or select the Cancel button toreturn to the previous menu.
Note:
Network information such as IP address, subnet mask and gateway will not berestored.
10.2
Exporting
&
Importing
Configuration
Configuration information from your DVR can be exported to a USB storage device andimported into another DVR. This will
allow you to efficiently setup the same configurationon numerous DVRs.
To export DVR configuration:
1.
Enter the Export/Import Configuration menu, shown in Figure 60 by going toMain Menu > Maintenance >
Export/Import Configuration.
Figure 60. Import/Export Configuration Menu
2.
Connect the USB storage device to a USB port on the DVR.
3.
Click the Refresh button. The contents of the USB storage device will be shownon the screen.
4.
Click the New Folder button to create a new folder or the Delete button to deletea file/folder.
5.
Select the location where you would like the configuration to be stored on theUSB storage device.
6.
Click Export to export a configuration file to USB storage device. The configurationfile will be named
devCfg.bin
.
7.
Click the Exit button to exit out of the Export/Import Configuration menu.
To import DVR configuration:
