HIKVISION DS-7200HVI-ST Series User Manual Download Page 55

Page: 55 / 58

DVR

Management

10.1

Managing

System

10.1.1

Upgrading

the

System

Firmware

The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:

Enter the Firmware Upgrade menu, shown in Figure 58 by going to MainMenu > Maintenance > Firmware

Upgrade.

Figure 58. Firmware Upgrade Menu

Connect the USB storage device to a USB port on the DVR.

Click the Refresh button. The contents of the USB storage device will be shownon the screen.

Select the firmware file. The firmware file is named

digicap.

Click the Upgrade button to upgrade the DVR. The DVR will automaticallyreboot after the upgrade is completed.
If you do not wish to upgrade at thispoint, click the Cancel button.

10.1.2

Restoring

Default

Settings

To restore factory default settings to your DVR:

Enter the Factory Default menu, shown in Figure 59 by going to Main Menu >Maintenance > Factory Default.

Summary of Contents for DS-7200HVI-ST Series



























































Search results

Summary of Contents for DS-7200HVI-ST Series

Reviews:

Related manuals for DS-7200HVI-ST Series

Brands by name

Popular brands

HIKVISION DS-7200HVI-ST Series, User Manual

Search results

Summary of Contents for DS-7200HVI-ST Series

Reviews:

Related manuals for DS-7200HVI-ST Series

Brands by name

Popular brands