45
Figure 47. Trigger Actions Sub-Menu.
3.
Select the alarm input to configure in the
Alarm Input No.
drop down menuon the upper left of the menu. If all
alarm inputs are to be configured with thesame settings, select
All
from the list
.
4.
Select the
Trigger Action
for the external alarm input device.
Normal Open
or
Normal Close
can be selected.
5.
Select the
PTZ Actions
(only if a PTZ camera is configured on the DVR) to runwhen the alarm input is triggered.
Only one PTZ action can be selected peralarm input.
6.
Select the
Actions
to run when the alarm input is triggered. Multiple actionscan be selected per alarm input. The
actions available includes:
•
Sound Audio Warning:
DVR will sound an audio warning if alarm is triggered.
•
Pop-up Image on Monitor:
DVR will show the corresponding channelthat is associated with the trigger input.
•
Notify Surveillance Center:
DVR will notify surveillance center whenalarm is triggered.
•
Send Email:
DVR will send an email out to the designated recipients whenalarm is triggered.
•
Trigger Alarm Output:
DVR will trigger alarm output when input is triggered.Selecting this option will enable
the Alarm Output list, where theoutput to trigger can be selected.
7.
Select the Save button to save the trigger settings and select Exit to return tothe previous menu. Selecting the
Exit button without clicking Save will quitout of the menu without saving settings.
7.5.3
Configuring
Exceptions
Actions can also be triggered when the DVR detects certain exceptions. To setup exceptionconfiguration:
1.
Enter the Exception Configuration menu, shown in Figure 48 by going toMain Menu > System Configuration >
Exception Configuration.
Figure 48. Exception Configuration Menu
