Network Speed Dome User Manual
74
5.4.3
Configuring Initial Position
Purpose:
The initial position is the origin of PTZ coordinates. It can be the factory default initial
position. You can also customize the initial position according to your own demand.
Customize an Initial Position:
Steps:
1.
Enter the Initial Position Configuration interface:
Configuration
>
PTZ
>
Initial Position
Figure 5-31
PTZ Configuration
2.
Click the PTZ control buttons to find a position as the initial position of the dome;
you can also call a defined preset and set it as the initial position of the dome.
3.
Click
Set
to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
to delete the initial
position and restore the factory default initial position.
5.4.4
Configuring Park Actions
Purpose:
This feature allows the dome to start a predefined park action (scan, preset, pattern
and etc.) automatically after a period of inactivity (park time).
