Network Speed Dome User Manual
70
5.3.6
Region Exiting Detection
Purpose:
Region exiting detection function detects people, vehicle or other objects which exit
from a pre-defined virtual region, and some certain actions can be taken when the
alarm is triggered.
Steps:
1.
Enter the Region Exiting Detection settings interface:
Configuration> Event > Smart Event> Region Exiting Detection
2.
Check the checkbox of
Enable
to enable the Region Exiting Detection function.
Figure 5-28
Configuring Region Exiting Detection
3.
Select the region from the dropdown list for detection settings.
4.
Click the
button to start the region drawing.
5.
Click on the live video to specify the four vertexes of the detection region, and
right click to complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can
click the
button to clear all pre-defined regions.
6.
Set the detection target for the region entrance detection.
You can select human,
vehicle, or all (human &vehicle) as the detection target from the dropdown list.
If Human is selected, only human beings will be identified as detection objects
and as well as Vehicle.
7.
Click
tab to enter the arming schedule setting interface. The
time schedule configuration is the same as the settings of the arming schedule
