Network Speed Dome User Manual
87
Network (WAN), you need to forward the 3 ports for the speed dome.
Steps:
1.
Enter the Port Settings interface:
Configuration > Network > Basic Settings > Port
Figure 6-8
Port Settings
2.
Set the HTTP port, RTSP port, HTTPS port and port of the speed dome.
HTTP Port
: The default port number is 80.
RTSP Port
: The default port number is 554.
HTTPS Port
: The default port number is 443.
Server Port
: The default port number is 8000.
3.
Click
to save the settings.
Configuring NAT (Network Address Translation) Settings
Purpose:
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the
implementation of networks in the house and corporate environments.
With the function enabled, you don’t need to configure the port mapping for each
port, and the camera is connected to the Wide Area Network via the router.
Steps:
1.
Enter the NAT settings interface by
Configuration >
Network > Basic Settings > NAT
2.
Check the checkbox of
to enable the UPnP™ function.
3.
Set the port mapping mode:
To port mapping with the default port numbers:
Choose
To port mapping with the customized port numbers:
Choose
And you can customize the value of the port No. by yourself.
