Network Speed Dome User Manual
114
Figure 6-39
Time Settings
Configuring Time Synchronization by NTP Server
Steps:
(1)
Check the radio button to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions by NTP server.
It can be set from 1 to 10080 minutes.
Figure 6-40
Time Sync by NTP Server
(3)
You can click the
button to check whether the confguration is succeeded.
If the speed dome is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44). If the speed dome is set
in a customized network, NTP software can be used to establish a NTP server
for time synchronization.
Configuring Time Synchronization Manually
Steps:
(1)
Check the
Manual Time Sync
radio button.
