HIKVISION DE3W User Manual Download Page 77

Page: 77 / 124

User Manual of Network Mini PTZ Camera

date or week if required.

(Optional) If you choose to enable the Display name, and then edit the PTZ
camera name in the text field of

Camera Name

Select from the drop-down list to set the time format, date format and display
mode.

You can use the mouse to click and drag the text frame

in the live view

window to adjust the OSD position.

Figure 7-36

Adjust OSD Location

The font color can also be customized, select the Custom in the drop down list
and select the font color on your demand.

Click

to activate above settings.

7.5.3

Configuring Text Overlay Settings

Purpose:

You can customize the text overlay.

Steps:

Enter the Text Overlay Settings interface:

Configuration

Advanced Configuration

Image

Text Overlay

Check the checkbox in front of textbox to enable the on-screen display.

Input the characters in the textbox.

Use the mouse to click and drag the red text frame

in the live view

window to adjust the text overlay position.

Summary of Contents for DE3W





























































































































Search results

Summary of Contents for DE3W

Reviews:

Brands by name

Popular brands

HIKVISION DE3W, User Manual

Search results

Summary of Contents for DE3W

Reviews:

Brands by name

Popular brands