HIKVISION AX HYBRID PRO User Manual Download Page 4

Page: 4 / 136

AX HYBRID PRO User Manual

iii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement
important points of the main text.

Note



Please update firmware to the latest version.



For installers, it is recommended to install and maintain devices via Hik-ProConnect.

Summary of Contents for AX HYBRID PRO









































































































































Search results

Summary of Contents for AX HYBRID PRO

Reviews:

Related manuals for AX HYBRID PRO

Brands by name

Popular brands

HIKVISION AX HYBRID PRO, User Manual

Search results

Summary of Contents for AX HYBRID PRO

Reviews:

Related manuals for AX HYBRID PRO

Brands by name

Popular brands