HIKVISION AX HYBRID PRO, User Manual

Page: 111 / 136

104
Chapter 4 General Operations
4.1 Access Entries
The installer and operators of the AX HYBRID PRO were assigned different access levels which
define the system functions that an individual user can perform. Various user entries are provided
for different user roles with particular access level.
Access entries for Installers (Access Level 3)

Hik-ProConnect Service
Hik-ProConnect is a service for installers that is used to manage customers’ alarm systems
located in various sites remotely. Control panels can be added to an installer account on the
Hik-ProConnect Service and be managed in sites.

Local Web Client
Visit the device IP address that can be found out with SADP tool. The installer can login with
Hik-ProConnect service account after the panel was added.

Other entries
Keypad PINs and tags can be also assigned with installer user at particular access level to
perform essential operations.
Access Entries for the Administrator and Operators (Access Level 2)

Hik-Connect Service
The Hik-Connect service can be used for end users to access and manage the devices.

Local Web Client (for the administrator)
As soon as the panel was added to the end user account on Hik-Connect Service, the Hik-
Connect account can be used to login to the web client build in.
Operators cannot login the web client.

Other entries
Keypad PINs and tags can be also assigned with end user at particular access level to perform
essential operations.
4.2 Arming
You can use keypad, keyfob, tag, client software, mobile client to arm your system.
After the arming command is sending to AX HYBRID PRO, the system will check the detector
status. If the detector is in fault, you will need to choose whether to arm the system with fault.
While the system is armed, the AX HYBRID PRO will prompt the result in 5s, and upload the arming
report.