HikRobot ID7000 Series User Manual Download Page 65

Page: 65 / 80

ID7000 Series Smart Code Reader User Manual

Output Retrans Enable

If this parameter is enabled, the data is allowed to retransmit to FTP server, and should set specific
value in

Output Retrans Number

Note

If data retransmission is still failed after the times allowed for data retransmission is reached, the
retransmission will be discarded.

FTP Transmission Conditions

It sets the condition to upload the data outputted by the device to FTP server.

All

refers to upload

the data always.

Read Barcode

refers to upload the data only when the barcode is read by the

device.

No Read Barcode

refers to upload the data only when no barcode is read by the device.

FTP Transmission Result Contain

It selects contents to upload to the FTP server.

Just Result

refers to only upload the content of

the code.

Just Picture

refers to only upload the code picture.

Result and Picture

refers to upload

both the content of the code and the picture.

FTP Image Format

It sets the format of the picture uploaded to FTP server.

Note

The device currently support JPG format only.

FTP File Default Name

It refers to the default name of the file uploaded to FTP server. You can set it according to actual
condition.

FTP File Separator

It refers to the separator that separates file name. You can set it according to actual condition.

FTP File Name Contain Package Number Enable

If this parameter is enabled, the name of the file uploaded to FTP server will contain the
package ID.

FTP File Name Contain Barcode Number Enable

If this parameter is enabled, the name of the file uploaded to FTP server will contain the
number of the barcode.

FTP File Name Contain FTP Timestamp Type

If this parameter is enabled, you can select different types of timestamp.

Summary of Contents for ID7000 Series

















































































Search results

Summary of Contents for ID7000 Series

Reviews:

Related manuals for ID7000 Series

Brands by name

Popular brands

HikRobot ID7000 Series, User Manual

Search results

Summary of Contents for ID7000 Series

Reviews:

Related manuals for ID7000 Series

Brands by name

Popular brands