ID7000 Series Smart Code Reader User Manual
52
It sets the range of barcode to be filtered. For example, the barcode is ABCDEFG, if you set this
parameter as 2, the device will output CDEFG at last and filter AB.
Begin with Specific Character for Result
If this parameter is enabled, the device will only read the barcodes which begin with a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Begin with
.
Include Specific Character in Barcode
If this parameter is enabled, the device will only read the barcodes which include a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Character
.
Exclude Specific Character in Barcode
If this parameter is enabled, the device will only read the barcodes which exclude a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Character
.
Regular Expression Filter Enable
If this parameter is enabled, the device will only read the codes which contain a specific regular
expression. You can enter the specific regular expression in
Regular Expression Filter
.
Min. Code Length
If the length of a barcode is shorter (in terms of the number of characters contained in the
barcode) than the configured value, the device will not parse the contents of the barcode. The
valid value is from 1 to 256. For example, if you set the value as 6, the device will not parse the
contents of the barcodes which contain less than 6 characters.
Max. Code Length
If the length of a barcode is longer ((in terms of the number of characters contained in the barcode)
than the configured value, the device will not parse the contents of the barcode. The valid value
is from 1 to 256. For example, if you set the value as 9, the device will not parse the contents of
the barcodes which contain more than 9 characters.
NoRead TimeOut
If no codes are not recognized after the time you set here, the client software will output NoRead
instead.
Read Times Threshold
If the reading results of a code is same for the configured times, the code will be regarded as valid
and its reading result will be outputted. Or the code will be regarded as invalid and its reading
result will not be outputted.
