ID7000 Series Smart Code Reader User Manual
35
9.2.2 Set 1D Algorithm Parameter
Click
All Features
on the upper-right to display all algorithm parameters. In the
Algorithm
Parameter
page, select
1DCode
as
Arithmetic Type
, and then you can set its corresponding
parameters.
Note
●
You should have selected at least one type of 1D code.
●
For different models of the device, the specific parameters may differ, and the actual device you
purchased shall prevail.
Timeout Value
Timeout value refers to the maximum running time of algorithm, and its unit is ms. The code
reader will stop parsing the images and return results if the time is exceeded the waiting time
configured.
Code 39 Check
Enable this parameter if Code 39 uses the parity bit.
Note
You need to select
Code 39
in
Add Barcode
.
ITF 25 Check
Enable this parameter if ITF 25 uses the parity bit.
Note
You need to select
ITF 25
in
Add Barcode
.
Code Score Enable
If it is enabled, the device will evaluate code quality and display overall grade and code score in
history record area of the client software. The higher the score, and the better the code quality.
9.2.3 Set 2D Algorithm Parameter
Click
All Features
on the upper-right to display all algorithm parameters. In the
Algorithm
Parameter
page, select
2D Code
as
Arithmetic Type
, and then you can set its corresponding
parameters.
Note
●
You should have selected at least one type of 2D code.
●
For different models of the device, the specific parameters may differ, and the actual device you
purchased shall prevail.
