PREDATOR XS TURNTABLE STRETCH WRAPPER OPERATION MANUAL
HIGHLIGHT INDUSTRIES, INC. ● 2694 PRAIRIE SW; WYOMING; MI 49519 ● 1-800-531-2465
III-1
OPERATOR CONTROLS
OPERATOR CONTROLS
OPERATOR CONTROLS
OPERATOR CONTROLS
The operator panel for Predator XS is shown and described as follows:
START
The “Start” button initiates all operations, in automatic or
manual modes. When the system is in automatic mode,
the button LED stays on until the wrapping cycle is
complete. In manual mode, the button LED flashes until
the operation is stopped.
WRAP/RESET
Switch to “Reset” and press the “Start” button to clear any
operation. The film carriage will lower to the bottom limit
switch and the turntable will return to its home position.
Switch to “Up Only” to select automatic single wrap
mode. Press the “Start” button to begin cycle. The film
carriage will begin applying the bottom wraps, travel
upwards to top of the product, apply top wraps, and then
stops. Press the “Start” button again to lower the film
carriage to the bottom limit switch.
Switch to “Up/Down” to select automatic double wrap
mode. Press the “Start” button to begin cycle. The film
carriage will begin applying the bottom wraps, travel
upwards to top of the package, apply top wraps, and
travel downwards to finish cycle.
TOP WRAPS
Switch to the desired number of rotations for applying
wraps to the top of the product.
BOTTOM WRAPS
Switch to the desired number of rotations for applying
wraps to the bottom of the product.
TURNTABLE
To run an automatic mode, switch to “Auto” and press the
“Start” button. To jog the turntable manually, switch to
“Manual” and press the “Start” button. To stop the
turntable, switch to “Auto”, or press the “Stop” button.
