PREDATOR XS TURNTABLE STRETCH WRAPPER OPERATION MANUAL
HIGHLIGHT INDUSTRIES, INC. ● 2694 PRAIRIE SW; WYOMING; MI 49519 ● 1-800-531-2465
II-8
6. Potentiometer: Allows an operator to directly set the motor speed when the potentiometer is
enabled for output frequency control.
7. Potentiometer Enable LED: ON when the potentiometer is enabled for value entry.
8. Parameter Display: A 4-digit, 7-segment display for parameters and function codes.
9. Display Units, Hertz/Amperes: One of these LED’s will be ON to indicate the units
associated with the parameter display.
10. Power LED: This LED is ON when the power input to the inverter is ON.
11. Function Key: This key is used to navigate through the lists of parameters and functions for
setting and monitoring parameter values.
12. Up/Down Keys: Use these keys alternately to move up or down the lists of parameter and
functions shown in the display, and increment/decrement values.
13. Store Key: When the unit is in Program Mode and you have edited a parameter value,
press the Store key to write the new value to the EEPROM.
Hitachi AC Drive Keypad Navigational Map
The front panel keypad is used to navigate to any parameter or function. The diagram below
shows the basic navigational map to access to these items.
Exhibit 2-4: Navigation of Hitachi AC Drive Digital Keypad
