HighEasy HY-8004HC User Manual Download Page 85

Page: 85 / 94

Page 85 of total 94 pages

Alarm out treatment:

Alarm out number:

setting 4 outputs.

Output time delay:

the time of delaying trigger alarm out

；

It is divided into 8 types, 5sec,

10sec, 30sec, 1min, 2min, 5min, 10min, and manual.

Exception setting:

linkage treatment on five abnormal state, such as hard disk single, IP

conflict, illegal access, hard disk error and input signal loss on linkage monitor alarm, sound

alarm, upload to centre and trigger alarm out and etc.

6.2.5 User management configuration

Select “user management”, shown as the following figure. it can modify the user password, super user

may increase users, and give the new user local authority and remote authority. Click authority before

assigning the authority, then select authority check box, and obtain the authority after confirm. After the

settings, press

【

】

—

【

save parameter

】

to complete the setting.

Summary of Contents for HY-8004HC































































































Search results

Summary of Contents for HY-8004HC

Reviews:

HighEasy HY-8004HC, User Manual, Page: 85 / 94

Search results

Summary of Contents for HY-8004HC

Reviews: