HighEasy HY-8004HC, User Manual, Page: 26 / 94

Page 26 of total 94 pages
Version information
Display information, such as number of
channels, Alarm in and output port quantities,
hardware version, software version, issuing date
and serial number and etc.
Common setting
Basic parameter setting, system time, date,
video storage parameter, serial number, signal
mode, window saver, language selection and
self-start when power supply is on
encoding setting
Set encode format, recording code rate, frame
rate, bit control method, video lost alarm, OSD,
dual-stream and mosaic, and so on
Timing
Set time period of four recording types,
including timing recording, alarm out, motion
detection and motion detection | alarm out, two
time period can be set for each type every day,
which include also all setting used in all
channels
Network setting
Set DVR IP address, subnet mask, gateway, http
port, media port, CMD port, management
server, PPPoE, dynamic domain name and NAT
etc.
Alarm setting
Real time Alarm in, device type, linkage
recording channel, linkage alarm out and handle
with Alarm in time section
Motion detecting
Set sensitivity of motion detection, detection
area and corresponding treatment
Pan setting
Set Pan/Tilt/Zoom decoder address and
parameters of Pan/Tilt/Zoom device
communication protocol, baud rate, data bit,
stop bit, verify and serial type and etc.
Display mode
Set parameters displayed on menu, such as
transparency, monitor patrol and loop output and
etc.
System settings
Restore Default
Resume default Common setting s