HighEasy HY-8004HC, User Manual, Page: 59 / 94

Page 59 of total 94 pages
Channel: it is used to select corresponding channel number. Press up and down direction key to select.
Protocol: it is used to select corresponding decoder protocol. Press up and down direction key to select.
Address: it is used to set corresponding Pan/Tilt/Zoom decoder address. Press number key directly to
input address value, range is 0-100.
Baudrate: set the baudrate for corresponding decoder. Press up and down direction key to select.
Data bit: select data bit for corresponding decoder. Press up and down direction key to select.
Stop bit: select stop bit for corresponding decoder. Press up and down direction key to select.
Verify: it refers to a kind of error detection method, including odd parity and even parity, it can have no
parity bit, what we select here is no parity bit method.
Type: it is used to select RS232 and RS485. Press up and down direction key to select.
5.3.4.4.8 Display
Display mode is to set parameters of menu displayed transparency and monitor patrol and etc.
Select display, press ok key, it will enter the following figure:
Transparence: can set menu transparence in accordance with user’s opinion, selecting range of
transparency is between 100-255. Press number key directly to input transparency value.
Preview Poll: set preview poll duration time, and patrol window, including single window, quad
window, nine-window and sixteen-window. Press ok key to select or cancel reverse display patrol