HighEasy HY-8004HC User Manual Download Page 35

Page: 35 / 94

Page 35 of total 94 pages

Press direction key

▲

▼

, it can switch among tone, brightness, contrast and saturation

Press direction key , it can adjust the selected parameter, and adjustment will go into

effect at once

Select

default

, press OK key , it can restore the channel video color parameters to default

value.

Select

All

, press OK key , it will change the video parameters adjusted for all channels.

When adjusting color parameter, press number key can switch to corresponding channel

Quick Search

: select to press OK key , it will enter the following figure:

Playback the search files involving this time point, if there is no search files in this time point, it

will play back last search files before the time point.

Press directly ok key , it can position the playback according to the channel and time

Press direction key , move time focus, it can press directly number key to change

▲

▲ ▲

Summary of Contents for HY-8004HC































































































Search results

Summary of Contents for HY-8004HC

Reviews:

HighEasy HY-8004HC, User Manual, Page: 35 / 94

Search results

Summary of Contents for HY-8004HC

Reviews: