DTS-60A / DTS-100A O
PERATORS
M
ANUAL
2.3.2 Operator Dialog
The Operator dialog is used for assigning labels for operator and company info, that is then used on
printouts and test history information extracted by a computer. The header information contains the
following items:
1. Company
2. Name
3. Contact Info
4. Other Info
The Operator dialog uses the Operator String Edit Operation as described in section 1.3.2. Another
example of usage is shown below in in Figure 2-5. This method is the same for all four labels.
SETTINGS
TIME/DATE
OPERATOR
LCD CONTRAST
LANGUAGE
OPERATOR
NAME
COMPANY
CONTACT INFO
OTHER INFO
OPERATOR
NAME
COMPANY
CONTACT INFO
OTHER INFO
HIGH VOLTAGE, INC
STEP 1
ENTER
Press the ENTER key while the selector points to
the OPERATOR Submenu
STEP 2
The Operator Submenu is shown.
Use the UP/ DOWN key to select a label to modify.
UP
DOWN
OPERATOR
NAME
COMPANY
CONTACT INFO
OTHER INFO
STEP 3
Press the ENTER key in order to enable
Operator String Edit mode for the selected label.
The string entry cursor is displayed at the line
above time and date.
ENTER
_
STEP 4
Enter the desired string using the methods
described in section 1.3.2 and at the end
press the ENTER key.
OPERATOR
NAME
COMPANY
CONTACT INFO
OTHER INFO
JOHN SMITH
STEP 5
Select another Operator label according STEP 2,
and enter the desired strings. If all the changes
have been made press the BACK key, in order to
return to Settings Menu
BACK
REGION
12:10 01/08/16 65°F
12:10 01/08/16 65°F
12:10 01/08/16 65°F
12:10 01/08/16 65°F
12:10 01/08/16 65°F
UPDATE FIRMWARE
UP
DOWN
MENU
BACK
Figure 2-5 –
Operator Set-up
20
Summary of Contents for DTS-100A
Page 92: ......
