HF-LPT220 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 48 -
Parameters:
status: indication of module AP connection status.
on: Enable nLink indication function. When STA device connecting to module
AP, nLink output Low, otherwise output High.
off: Disable nLink indication function.
(default mode)
.
4.2.2.49.
AT+WAPMXSTA
Function: Set/Query max STA number supported for AP.
Format:
Query Operation
AT+WAPMXSTA<CR>
+ok=<num> <CR><LF><CR><LF>
Set Operation
AT+WAPMXSTA=<num><CR>
+ok<CR><LF><CR><LF>
Parameters:
num: max STA number supported for AP.
1~4: Support max 1~4 STA devices connects to module AP.
0 is default
value for max 1 STA device supported.
4.2.2.50.
AT+OTA
Function
：
Set OTA Upgrade
Format
：
Set Operation
AT+OTA<CR>
+ok=<CR><LF><CR><LF>
Note: See Appendix C Module Upgrade for detail
4.2.2.51.
AT+UPURL
Function: Set/ Query remote upgrade URL address;
Format:
Query Operation
AT+UPURL<CR>
+ok=<url> <CR><LF><CR><LF>
Set Operation
AT+UPURL=<url,filename> <CR>
+ok<CR><LF><CR><LF>
Parameters:
url: the upgrade file url address; the last charter shall
be “/” (within 20 characters).
filename: the upgrade file name, it’s optional and not saved parameter. If provide
this file name here, the module will start upgrade right away;
4.2.2.52.
AT+UPFILE
Function: Set/ Query remote upgrade configure file name;
Format:
