CHAPTER 2
SolaWash 19 LED Setup and Configuration
SolaWash 19 LED User Manual
15
Powering On the Fixture
To power on the SolaWash 19 LED fixture, simply connect it to a 100V-240V AC power source.
Once the SolaWash 19 LED fixture is connected to a power source, it automatically begins a
homing procedure to verify that fixture components are functioning.
Shutting Down the Fixture
A DMX controller can shut down the fixture remotely with the Shutdown option in the Control
Channel or you can simply disconnect from power. The SolaWash 19 LED fixture automatically
shuts down in the event of DMX data loss longer than five minutes.
WARNING:
This equipment is designed for connection to a branch circuit having
a maximum overload protection of 20 A.
CAUTION:
Do not power on the fixture until verifying that the line cord cap is
suitable for the power source in your location. For more information,
see Installing a Power Cord Cap on page 8.
Do not unplug motor harnesses while unit is powered.
