CHAPTER 4
Preset Programming
36
SolaWash 19 LED User Manual
Edit Scenes
A parameter is a fixture attribute that can be controlled to modify the light beam in terms of color,
beam quality and pattern, intensity, or focus (position). DMX programming assigns a DMX value to
each of the fixture’s parameters. A scene is one combination of parameter settings.
SolaWash 19 LED fixtures provide 250 pre-programmed scenes you can use or edit to build a
preset program. The first 64 scenes have factory created settings which can be edited as desired.
Edit Scene Parameters
The Edit Scenes option lets you select a DMX value for any of the 28 parameters in the SolaWash
19 LED DMX protocol
.
To edit the DMX parameters in a scene:
1. Navigate to and select the Preset menu as shown on page 35.
2. Use the
buttons to scroll to the Edit Scenes option and press to
select.
3. Use the
buttons to scroll to the Scene number you wish to build on from 1-250 and
press
to select.
4. Use the
buttons to scroll to the parameter you wish to edit (Pan, Tilt, MSpeed,
Color Wheel, etc.) and press to
select.
5. Use the
buttons to scroll to a new DMX value for the parameter you have selected
and press
to select.
This takes you back to parameter options. Continue through all parameters until your desired
look is complete. See Chapter 5: DMX Programming on page 39 to find parameter values for
the option you want to assign.
6. When you are finished selecting all parameter values for a particular Scene, press the
button to return to the Preset level menu.
Edit Scene Time
This Scene Edit option lets you set the scene time in seconds from 00.2s–99.9s. The default
value is 00.3s. This values determines how long the scene will play before the next scene is
triggered.
Set Fade Time
This Scene Edit option lets you set a fade time value from 000–255. This values determines the
crossfade time applied to parameters once the scene is triggered.
MODE
/ ESC
