CHAPTER 3
Menu System
SolaWash 19 LED User Manual
27
Pan/Tilt Speed
This options adjusts the maximum movement speed of the pan and tilt parameters. The Speed 1
option is the default normal movement speed. Speed 2, Speed 3, and Speed 4 options are
progressively slower maximum movement speeds.
Mic Sensitivity
You can adjust the input level for the internal microphone by setting this option from 0% –99%.
The Default value is 70%.
Hibernation
This menu option determines when the fixture shuts down after DMX data loss. You can choose
any time between 1 minute and 99 minutes after data loss to shutdown. The default setting is
15M. Selecting Off will shutdown the fixture immediately upon loss of DMX signal.
For example, to change the Hibernation time from the default setting:
1. Navigate to and select the Set menu as shown above.
2. Using the
buttons, scroll to Status and press the
button to select.
3. Using the
buttons, scroll to Hibernation and press the
button to select. The
default setting of 15M will be displayed.
4. Using the
buttons, scroll to a number of minutes between 1 and 99 and press
to
select or
to return to the last menu level.
Service Setting
Two options for service setting allow you to set a Service Password or a RDM PID code.
To change the Service Password:
1. Navigate to and select the Set menu as shown on page 26.
2. Using the
buttons, scroll to Status and press the
button to select.
3. Using the
buttons, scroll to Service PIN and press the
button to select. The
current password will be displayed. The default is Password = 050.
4. Using the
buttons, scroll to a 3-digit number and press the
button to select as the
new service password.
Note: A service password must be set before you can enter a six digit RDM PID
number.
MODE
/ ESC
