SolaWash 19 LED User Manual
7
Chapter 2: SolaWash 19 LED
Setup and Configuration
Installation of your SolaWash 19 LED fixture includes mounting, connecting
to power, DMX linking and configuration.
Use the following steps to set up and configure your fixture:
1. Unpack the fixture.
2. Install power cord cap for your location.
3. Mount the fixture upright or suspended from a standard truss.
4. Connect the fixture to a DMX controller via DMX cabling.
5. Configure the fixture for DMX control.
Unpacking the Fixture
The SolaWash 19 LED fixture ships in packaging specifically designed to protect the product
during transport. When unpacking, inspect the fixture for physical damage to components. High
End Systems
®
assumes no responsibility for products that are damaged during transport. Return
a product for repair in its original packaging.
Before sending anything to the factory, call your High End Systems dealer/distributor
for a Return Material Authorization (RMA) number. The factory cannot accept any goods
shipped without an RMA number.
