background image

© High End Systems, Inc. 1999, All Rights Reserved

Information and specifications in this document are subject to change without notice. High End Systems, Inc. assumes no
responsibility or liability for any errors or inaccuracies that may appear in this manual. The system software for Power Cue
Store described in this manual is furnished under license, and is protected by copyright law and international treaties.

Trademarks used in this text:  High End Systems is a registered trademark; and Power Line and Power Cue Store, are
trademarks of High End Systems, Inc. Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. High End Systems disclaims any proprietary interest in
trademarks and trade names owned by others.

Contacting High End Systems

U.S. and the Americas:

Sales Department: High End Systems, Inc.

2217 West Braker Lane

Austin, TX 78758 USA

voice:

(512) 836-2242

FAX:

(512) 837-5290

Customer Service:High End Systems, Inc.

2227 West Braker Lane

Austin, TX 78758 USA

voice:

(800) 890-8989

24-hour FAX:

(512) 834-9195

24-hour voice mail:(512) 837-3063 

or

(800) 890-8989

U.S. West Coast: High End Systems, Inc.

8200 Haskell Avenue

Van Nuys, CA 91406 USA

voice:

(818) 947-0550 

FAX:

(818) 908-8975

World Wide Web:

http://www.highend.com

Power Cue Store

TM

User Manual

Page 

1

Summary of Contents for Power Cue Store




















Reviews: