High End Systems Power Cue Store, User Manual

Page: 10 / 19

Scene selection functions as follows:
o
If you are in pass-through mode, the chosen scene will be output when you
go to manual mode.
o
If you are in manual mode, the chosen scene will be the next scene to be
output after pressing the
AUTO
button or using the slider.
o
In external control mode, the chosen scene will be output after you flash
STEP , as discussed in “External Control”.
Scene Types
When you set up a scene (see the section “Loading Scenes Into the Power Cue
Store”), it is given default Fade and Hold times according to the selection made
during configuration.
While in pass-through mode, use the SCENE TYPE button to:
o
Change or edit fade and hold times.
o
Reset the scene back to default values.
o
Delete the scene.
o
Flag the scene as the first scene in a sequence.
o
Flag the scene as the last scene in a sequence.
Each press of the button will step you through these functions. You can abort any
option by waiting for a timeout after five seconds, or by pressing
ESC
.
Changing the Fade Time
To change the Fade time:
1. Press SCENE TYPE until FAd appears in the display.
2. Press
STORE
.
The current Fade value appears in the display.
3. Adjust the value with the slider. Fade values are adjustable between 0-0.9
seconds, and 1-99 seconds.
4. Press
STORE
until the display shows
YES
.
Changing the Hold Time
To change the Hold time:
1. Press
SCENE TYPE
until
Hld
appears in the display.
2. Press
STORE
.
The current Hold value appears in the display.
3. Adjust the value with the slider.
Hold is adjustable between 0-0.9 seconds, 1-59 seconds and 1-30 minutes.
4. Press
STORE
until the display shows
YES
.
Page 8 Power Cue Store
TM
User Manual