HF-A11 Embedded WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
47
Format:
AT+TCPCKB<CR>
+ok=<sta><CR>< LF ><CR>< LF >
Parameters:
sta: TCPB link status
on, TCPB link OK
off, TCPB link not availabe
4.2.2.32. AT+EPHY
Function: Open/Close ETH interface;
Format:
Set
Operation
AT+ EPHY=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
On/off
Off: Close Ethernet port function;
On: Open Ethernet port function;
Close module’s Ethernet port function can reduce the power consumption. The default setting for
HF-A11 is close Ethernet port function.
4.2.2.33. AT+STTC
Function: Enable/Disable STA port scan function;
Format:
Query
Operation
AT+ STTC<CR>
+ok=<sta><CR>< LF ><CR>< LF >
Set
Operation
AT+ STTC=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
sta: when query, this value feedback
On: Enable STA port scan function;
Off: Disable STA port scan function;
4.2.2.34. AT+DOMAIN
Function: Set/Query domain ofmodule webpage;
Format:
Query
Operation
AT+ DOMAIN<CR>
+ok=<domain><CR>< LF ><CR>< LF >
Set
Operation
AT+ DOMAIN=<domain><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
domain: domain to acess to module webpage.
4.2.2.35. AT+FRLDEN
Function: Enable/Disable nReload pin function;
Format:
Query
Operation
AT+ FRLDEN<CR>
+ok=< on/off ><CR>< LF ><CR>< LF >
Set
Operation
High-Flying
