HF-A11 Embedded WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
48
AT+ FRLDEN=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
on/off: Enable or Disable nReload pin function.
On, enable nReload pin function;
Off, disable nReload pin function;
Notes: AT+FRLDEN is F-Setting, means restore to factory setting will not affect this
command.
4.2.2.36. AT+RELD
Function: Restore to factory default setting;
Format:
AT+ RELD<CR>
+ok=rebooting…<CR>< LF ><CR>< LF >
This command restores the module to factory default setting, and then re-starts the module.
4.2.2.37. AT+Z
Function:
Re-start
module;
Format:
AT+ Z<CR>
4.2.2.38. AT+MID
Function: Query module ID information;
Format:
Query
Operation
AT+MID<CR>
+ok=<module_id><CR>< LF ><CR>< LF >
Parameters:
module_id: Module ID information;
A11-yymmddnnnn “yymmdd” date; “nnnn” serial number;
4.2.2.39. AT+VER
Function: Query module software version information;
Format:
Query
Operation
AT+VER<CR>
+ok=<ver><CR>< LF ><CR>< LF >
Parameters:
ver: Module software version information;
4.2.2.40. AT+H
Function:
Help;
Format:
Query
Operation
AT+H<CR>
+ok=<commod help><CR>< LF ><CR>< LF >
Parameters:
commod
help:
command
introduction;
High-Flying
