HF-A11 Embedded WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
26
3. OPERATION GUIDELINE
3.1. Configuration via Web Accessing
When first use HF-A11 modules, user may need some configuration. User can connect to HF-
A11 module’s wireless interface with following default setting information and configure the
module through laptop.
Table 5 HF-A11 Web Access Default Setting
Parameters
Default Setting
SSID HF-A11x_AP
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
admin
Password admin
3.1.1. Open Web Management Interface
Step 1: Connect laptop to SSID “HF-A11x_AP” of HF-A11 module via wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access “
http://10.10.100.254
”;
Step 3: Then input user name and password in the page as following and click “OK” button.
Figure 22. Open Web Management page
The HF-A11 web management page support English and Chinese language. User can select
language environment at the top right corner and click “Apply” button.
The main menu include five pages: “Mode Selection”,” AP Interface Setting”,”STA Interface
Setting”,”Application Setting”, and “Device Management”
Notes:
Default, High-Flying suggests all Web management related operation shall execute at AP mode.
(Even you need configure STA parameters and want module works as STA mode). If user
selects STA mode and still want to configurate the module through Web browser, you have to
access the module through another AP (and get the module IP address through this AP.)
3.1.2. Mode Selection Page
This page use to setting the module working mode (Transparent Transmission or Agreement
Transmission) and wireless networking mode (AP and STA mode).
High-Flying
