f) Align the front of the rail with the holes on the rack posts that will receive the rails and pull the rail
toward the holes until the toolless latching mechanism engages the rack.
Figure 96: Front Rail Release Clip Operation
Clic
k!
g) Use a level to make sure that the rails are aligned properly.
h) Follow these steps for the other outer rail.
22. Install the rear cover alignment brackets.
a) From the rear of the rack, orient the alignment brackets so that the groove that will catch the cover is
facing the inside of the rack.
Figure 97: Alignment Bracket Groove (highlighted in red)
96
4
Part Replacement
User Guide
4.8
Rails Replacement
