a) Orient the CMA so that the elbow is on the right hand side as it is being installed.
Figure 67: Upper CMA Orientation
b) Attach all of the connectors to the brackets on the rails and chassis. There should be one at the elbow
side and two on the left hand side.
10. Cable the lower CMA.
a) Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button that says
“push” to unlatch it.
b) Gather the SAS cables, one power cable, and one Ethernet cable to install in the left hand side.
Note: Before cabling the lower CMA, note the following routing of the cables. For best results,
the cables that are supported by the upper CMA are inserted into IOM B (right hand side looking
at the rear) and the lower CMA cables are routed to IOM A (left hand side looking at the rear)
76
4
Part Replacement
User Guide
4.7
CMA Replacement
