d) Loop the retention clip on the PSU cables around the cable and pinch it until the clip catches and locks
in place.
Figure 46: Cable Retention Mechanism
e) Slide the retention clip forward until it stops near the cable connector. Doing this will ensure that the
retention clip functions properly in the event the cable is pulled on for some reason.
Figure 47: Cinching Cable Retention Clip
8. Make sure the CMA is in operational position by folding the arm in toward the enclosure and attaching the
elbow end of the CMA to the connector that is attached to the rail. Verify that all of the cabling is in functional
order and does not bind or catch.
63
4
Part Replacement
User Guide
4.3
PSU Replacement
