User manual - Machine Automation Solution - V3R003
13 / 102
5. Running display for the first time
Warning
We recommend starting the vehicle before turning the display on.
5.1 Starting the device
To turn the monitor on, proceed as follows:
1.
Press the
On
Button on the front panel of the display
for one second;
2.
The display
will show the screen for selecting
Language
,
Time Zone
, and
Theme
;
3.
Enter the desired settings and confirm;
4.
If operating in the quick launch mode, when starting your display
for the first time, the new work session setup
wizard will show. Go to topic
New job section on fast start mode
5.
If operating in the conventional launch mode, go to next topic
.
Important
The fast start mode is only available for the display
with solely and exclusively the
Guidance
activated. To enable or disable this function, select the
Fast mode ON/OFF
option located on
the right side of the work session list. The display
will always start in the same startup mode
it was operating in when it was turned off (quick launch mode or conventional launch mode).
Figure - Language and time zone selection
5.2 Shutting down the monitor
To shutdown the monitor of your display, proceed as follows:
1.
Press the
Off
button on the front of the module;
2.
A confirmation message will be displayed;
3.
Confirm the operation by selecting
Yes
;
4.
Wait for the screen to turn off.
Warning
Do not remove the power source without the screen turning off completely.
