Hexagon AgrOn Ti10, User Manual

Page: 28 / 102

User manual - Machine Automation Solution - V3R003 28 / 102
Figure - Removing perimeter loops
It is possible to import a ready-made perimeter file into the on-board computer, see the topic Importing files .
7.5.3.3 Drift position
In the Tools option, it is possible to use the Drift position feature to demarcate a known field position and later use it to
sync the GNSS position.
Icon Description
New marker
Position adjustment
Undo adjustment
Important In order for the Drift position feature to be available, there must be a GNSS signal.
Important
In order to insert a new marker or perform the adjustment, the vehicle cannot me in operation
or in motion.
New position
To mark a new position, proceed as follows:
1.
Position the tractor where you want to add the marker;
2.
On the Operation screen, select the Tools option;
3.
Press the Drift position option;
4.
Select the New marker option;
5.
Select Yes to confirm the insertion;
6.
The system draws a mark on the floor of the operation screen.
Important
Be sure to physically mark the demarcated location (by inserting a stake or other marking
medium).
Position adjustment
Important This option will only be available if there is a previously made mark on the field.
To adjust the position, proceed as follows:
1.
Position the tractor on the same physical location on the field where the marked was inserted;