User manual - Machine Automation Solution - V3R003
66 / 102
Guide management
Import
To import guides through the
Guide manager
, proceed as follows:
Important
First insert the pendrive with the guide(s) you wish to import.
1.
On the operation screen select the
Guide
option followed by
Guide management
;
2.
Select option
Import
;
3.
he system will show the pendrive files that can be imported;
4.
Select the desired files and press
OK
to confirm;
5.
Wait for the progress bar to finalize importing.
Figure - Import guide
Warning
Beware of the following restrictions when loading a line map:
·
The display
imports existing lines on your map, but does not create the parallel lines;
·
Your map must contain at least 75 points to be imported.
The imported guides will show on the list of guides.
Important
In case the imported guide has the same name of a previously saved guide, a number will be
added to the end of the file name. The previously saved guide will not be overwritten.
If the imported guide was created in a Hexagon Agriculture display, it can be imported as an
Original guide
or as a
Line
map
, depending on how it was exported. See topic
.
Important
If the guide was created on an on-board device from a manufacturer other than
Hexagon
Agriculture
and is
incompatible
, the guide(s) will always be imported as a
Line map.
11.2.3.3 Export guide
Important
This feature will not be available if the selected guide is temporary.
This option allows exporting guides from the display to a pendrive.
