User manual - Machine Automation Solution - V3R003
87 / 102
Important
The flag sensor buttons are available for the display Ti10.
·
Primary CAN
This option you can select
Isobus
or
HxAg
.
13.2.7 Data synchronization
Important
Feature available only in the
Advanced
mode.
On the data syncing screen it is possible to configure automatic software updates. The automatic update is only possible it
the display
is connected to the Internet.
To configure data syncing, proceed as follows:
1.
Select option
Settings
from the
Configuration menu
;
2.
Go to
Advanced mode
;
3.
Select option
Data synchronization
;
4.
Enter the hostname. This field is factory filled with the default hostname
.
Important
This server is also used for the Routes feature.
5.
Select option
On
so that the update is ready for installation through the system manager. In the
Off
state it is
not possible to update the software because there is no communication with the server
;
6.
In the
Period
(minutes) option, select the time interval in which the display will check for new updates
.
Important
In the
Software version
and
Config
version
options, it is possible to check the last updated
version.
Figure - Data synchronization
On the right side the following options are available
:
·
Show update alert
Asks the user if he wishes to download the new update.
·
Download over mobile network
Select this field if you want the Ti to use the mobile network if it is unable to connect to the Wi-Fi network for
the download.
·
Install automatically
The display automatically installs the software updates without asking the user for permission on the device
boot following the update download.
13.2.8 RFIDs tags list
