User manual - Machine Automation Solution - V3R003
14 / 102
6. Job section
A
job section
consists of the combination of various information that characterize a performed job, such as the performed
activity, in which farm, in which field, etc.
In order to operate the display, there must always be a running work session, which may have been previously created or
completely new. For this reason, when the device is turned on, the system directs the user to the
Job section
management screen.
Important
The
Job section
management may also be accessed at any time by the used through the
Configuration menu
.
Job section in conventional mode
From this screen one may
select
,
delete
, or
create a new
job section.
Figure - Conventional job section
Job section on fast start mode
The job section on fast start mode is only available for the displays
with solely and exclusively the
Guidance
activated. To
enable or disable this function, select the
Fast mode ON/OFF
option located on the right side of the job section list. The
display
will always start in the same startup mode it was operating in when it was turned off (fast start mode or
conventional mode).
From this screen one may select, delete, or create a new job section, enable or disable the fast start mode, or view the
settings of the last implement used.
Figure - Job section on fast start mode
6.1 Selecting a job section
Job section selection is the same for both launch modes. See topic
To select a job section, proceed as follows:
1.
Select a
Job section
among those presented on the screen;
2.
Press
OK
to start the operation.
Important
Regardless of the
Job section
selected from the list, display will always use the settings for
the last implement used. To check the current values, on fast start mode they are displayed in
the indicator boxes on the right side of the screen.
