Hettich CADRO, Technical Information

Page: 10 / 47

10 | 11
F2
F4
F1
F3
1
2
The drilling and tapping jig is specially designed for the profiles of the
CADRO system. It is fixed only once on a pillar drilling machine and
then offers the possibility to drill precise and uniform holes by simply
changing the position of the stop plate.
1
The drilling and tapping jig is mounted with the centering hole
exactly on the drilling position of the pillar drilling machine..
2
The profile to be processed is placed in the middle of the rail of the
drilling and tapping jig and then slided with the profile‘s end against the
stop plate, Thus it obtains a firm hold for further processing.
Some profiles require additional sets for a safe positioning in the drilling
and tapping jig. These are optionally available
(see page 11) . In this case
the stop plate must be turned upwards by 180° with the pin for fixing
the profile.
There are 4 possible positions for the stop plate which must be
selected depending on the type and function of the required drill
hole
(see page 11).
Structure and function.
Stop plate
4 different
positions for
the stop plate
Center hole for the
positioning on the pillar
drilling machine
(position of the drill)
Fixing points for optional sets
(e.g. sliding door profiles)
Optional sets
(e.g. for sliding door profiles)
Positions for the stop plate.
The stop plate can easily be moved to the desired position by
loosening and rescrewing the two cylinder head screws.
F1
– M5 for connector
– M5 for universal connector
F2
– M6 for optional side wall attachment
(eccentric dowel pin)
– M5 for corner connector
– Ø 8 mm for glass door hinge hole
(with fixing stop attachment 82927.04.0000)
F3
– M5 for securing screw for wall mounting
F4
Recommendation to obtain uniform distances
for pieces and series of furniture:
– Ø 4,5 mm for the alternative wall mounting and
– Ø 10 mm for the cover cap
(page 14)
Optional sets.
Drilling and tapping jig
order no. 9 298 865
Pillar drilling machine
Center hole for the
positioning on the pillar
drilling machine
(position of the drill)
1
2
The drilling and tapping jig.
CADRO Base.
Additional sets For profile
82927.02.0000
(2x2 attachments)
for sliding door profiles
82913.****/82915.****
82914.****/82916.****
83104.****/83106.****
83105.****/83107.****
82927.03.0000
(3x2 attachments)
for display profiles
83108.****
83109.****
83120.****
82927.04.0000
(2 fixing stop plates)
for glass door hinge hole