28 | 29
10
2
3
Assembly.
The assembly of the frame is done in the same way as described on
page 12 | 13. As for the lighting profiles and connectors for lighting and
cable guidance, their use results from the previous planning
(Example described on page 26).
Integration of LED lighting strips.
1
Now the self-adhesive LED lighting strips are simply glued into
the lighting profiles according to the planning.
Alternatively, the flexible LED lighting strips can also be laid directly
in the frame across the corners.
2
The illuminated areas of the profiles are covered by the diffusing
profiles
Laying the cables.
3
For an invisible power supply, the cables are guided through
the lighting profiles to the connector for power supply being covered
afterwards by a cover profile which matches the colour of the frame.
PLEASE NOTE:
Experience has shown that one lighting profile can accommodate
a maximum of 3 cable lines (6 x 1.5 mm outside diameter). In its
cross section the closed duct measures 2,9 x 8,8 mm.
Power supply.
Cable exit.
For the connection to an LV-transformer a
ll cables are guided through
the connector for power supply towards the outside, that is usually
towards the wall - in case of hanging furniture mostly upwards, as for
standing furniture also downwards.
CADRO Lighting.
1
10
Connector for
power supply
9 298 843 / 9 298 844
Cable of the
LED lighting strip
Cover profile
82903.****
Diffusing profile
82903.0000
LED lighting strip
alternative
Summary of Contents for CADRO
Page 1: ...Rahmensystem Technical Information and Assembly...
Page 47: ...06_2022_HMV...
